Care guide

Why Is My Bearded Dragon Glass Surfing?

Quick answer: Glass surfing — repeated pacing and clawing at the enclosure walls — is almost always a stress or environmental signal, most often an undersized enclosure, an unstable temperature gradient, or a visible outside trigger like another pet or reflection.
Most common causeEnclosure too small or gradient off

Start by checking enclosure size against the 4x2x2ft minimum, confirming the basking and cool-side temperatures are correct, and covering or moving the enclosure away from reflective glass, busy foot traffic, or another animal's line of sight. Breeding-season males may also pace when they sense a female nearby. Persistent surfing after ruling these out warrants a closer health check.

behaviourstress

See the full care guides guide, or browse all 467 info pages.

Related care guides
Bearded Dragon Enclosure: What You Actually Need

A single adult bearded dragon needs a minimum 4ft x 2ft x 2ft enclosure, with 6ft x 2ft x 2ft increasingly recommended as best practice — plus a linear T5 HO UVB tube, an overhead basking bulb on a thermostat, a real thermal gradient, a sturdy basking platform, and a shallow water dish.

Bearded Dragon Setup Checklist: Everything Before Day One

A complete bearded dragon setup needs a 4ft+ enclosure, a linear T5 HO UVB tube, an overhead basking bulb on a thermostat, two thermometers, a basking platform, a hide, a shallow water dish, and age-appropriate substrate — all running and stable for at least 48 hours before the dragon arrives.

Bearded Dragon Tank Size Guide: By Age

Hatchlings can start in a 20-gallon long tub, juveniles need to move to roughly a 40-gallon breeder footprint by a few months old, and adults need a minimum 4ft x 2ft x 2ft enclosure, with 6ft x 2ft x 2ft recommended.

Bearded Dragon Heating: Basking Temps & Setup

Basking surface temperature should run 95–110°F depending on age (hotter for hatchlings, cooler for adults), with a cool side around 75–85°F, all provided by an overhead basking bulb on a thermostat — not a heat mat or heat rock.

Bearded Dragon UVB: Why It's Mandatory, Not Optional

Bearded dragons need a linear T5 HO UVB tube at 10.0 or 12% output, running the length of the basking third of the enclosure with nothing between bulb and dragon, replaced every 6–12 months regardless of whether it still produces visible light.

Bearded Dragon Humidity: Why Lower Is Correct

Bearded dragons should be kept at roughly 30–40% ambient humidity. Sustained humidity above 50% significantly raises the risk of respiratory infection in this dry-climate species — brief daily misting or a shallow soak handles hydration and shedding needs without pushing ambient humidity up long-term.